DIY Easter Gnome with Glove and Sock

This adorable DIY Easter gnome is created with a Dollar Tree glove and sock. It is done in about 10 minutes and uses only a hot glue gun to assemble – no sewing!

Gather a glove, an ankle sock, a bit of fur, and a few extra craft room staples to get started. A full written, printable, and video tutorial is below to produce this 8.5 inch bunny gnome.

Horizontal close up image of a gray bunny gnome made with a glove and sock from the Dollar Tree in front of a pitcher with greenery and Easter eggs.
This 10 minute DIY Easter gnome craft makes quick work of a glove, a sock, and some fur.

Easter Bunny Gnome

Here at Ruffles and Rain Boots, I like to put together small holiday displays on tiered trays, on tables, and in bookcases. Tucking seasonal items in is just an easy way to keep decorating time to a minimum.

Because while I’m always excited to set out the new holiday decor, I’m never as thrilled to put it all away.

Get Secret Gnomes, Tips, & Freebies Delivered!

What is the best pattern to use when you don’t want to sew? Do you know the secrets to a properly-proportioned gnome? Do you know where to get the best-priced fur? 

Get all of this (and exclusive content just for you) delivered right to your inbox with the gnome-making series, free of charge. Sign up to get the once-weekly newsletter (and a jaw-dropping special offer)!

collage of diy gnomes teaching how to make a gnome with or without legs and with or without sewing

For my Easter decor this year, I have two trays, two small tables, and one shelf I want to put a few seasonal pieces on. Because my craft stash is overflowing, I decided to challenge myself with items I could find only in my craft room. I cleaned up an area of my craft room, found this glove, a Dollar Tree sock (have no idea where the other one is), and this guy came together.

Horizontal image of an Easter bunny gnome DIY from ruffles and rain boots in front of a wood background with farmhouse beads, twine wrapped Easter eggs, and greenery in a white pitcher.
I love projects like this bunny gnome that look as good in the back as they do in the front.

No Time to Make This Now? Save or Share for Later

If you need to check your craft room floor for a sock or glove, I get it. Save this adorable Easter gonk to a Dollar Tree gnome pin board or share it on Facebook. It will be easier to find when you’re ready to make this.

Vertical image of a bunny gnome made with a sock and glove from the Dollar Tree and white faux fur in front of a light wood background.
This simple gnome is a great afternoon craft win.

As an Amazon Associate, I could earn from qualifying purchases. There could be affiliate links within this article.

Tips for Making a Glove Gnome Bunny

  • I found this fuzzy glove and the ankle sock at the Dollar Tree, but always keep your eyes out for clearance items at the end of the season. The craft stores have some amazing finds when holidays change and gloves can make great gnome hats.
  • My preference is to add the twisted pipe cleaners at the end of the bunny gnome making process, however, you can do it when you wish. The only advice I have is to glue them to the base of the body only and leave the top unglued because the ears look better.
  • If you’re new to cutting faux fur, here are my basic tips: make sure all pile points down, draw on the fabric backing, use an Exacto knife, and only cut the fabric backing. There is no need to press hard. Are you a visual person? If so, watch this video on how to cut faux fur.
  • Do not cut the top of the sock for this gnome because we want it to help smooth out that bunny head and sides of the gnome. Those bunny ears need to stand out.
  • Weight and fill for gnomes can vary based on what you have on hand and what you’re comfortable with. I prefer not to use food products, so a sock with rice or beans is out for me. I’ll link everything I use below, but a few more ideas for weight are aquarium gravel (very small rocks), sand in a bag, or even glass vase filler. For the fill, use the inside of inexpensive pillows or clean stuffed animals.
Square close up image of a gray bunny gnome made with a glove and sock in front of a wood background with farmhouse prayer beads and greenery.

How to Make a DIY Easter Gnome Bunny with Floppy Ears and a Tail

Below is the written tutorial for this adorable bunny gnome. If you are a visual learner or create playlists, here is the full no sew DIY Easter gnome video tutorial. While you’re watching, please subscribe – we have a lot of fun there.

Yield: 1 Gnome

DIY Easter Gnome with a Glove and Sock

Square close up image of a gray bunny gnome made with a glove and sock in front of a wood background with farmhouse prayer beads and greenery.

This adorable DIY Easter gnome is made with a glove and a sock - no sewing necessary. Gather up a few craft room staples and you can make this bunny with bendable ears in just minutes.

Active Time 10 minutes
Total Time 10 minutes
Difficulty Easy
Estimated Cost $3

Materials

  • Glove
  • Ankle Sock
  • White Mongolian Fur
  • Nose (I used a 1/2“ Wood Ball)
  • Embroidery Thread
  • Pipe Cleaners (2)
  • Poly Pellets
  • Poly Fill
  • Cardboard for a Base, optional

Tools

  • Exacto Knife
  • Hot Glue Gun and Glue Sticks
  • Pen

Instructions

  1. Turn the glove inside out. Cut the thumb and pinky finger off the glove. Cut the middle finger off at the base of the finger. Set middle finger aside for a different project like my mini gnome ornaments.Horizontal image showing scissors cutting into a fuzzy glove to make a bunny gnome.
  2. Glue the glove sides and middle finger closed.Horizontal image showing an inside out glove being glued on the edges to form an Easter bunny gnome.
  3. Turn the thumb right sides out and fill it with the glove’s pinky finger. Form into a round and glue at the base. Cut off the excess thumb fabric. Set aside.Horizontal image which shows the creation of a bunny tail for an Easter gnome using the fingers from a glove.
  4. Trace a 2-3 inch circle onto cardboard, cut out, and glue to the inside of the sock. Make sure the toe seam is pulled up over the cardboard so it sits flat.Close up horizontal image showing how to make a sock gnome stable on the bottom by adding a cut of cardboard.
  5. Add about 1/2 cup of Poly Pellets and fill the rest full of Poly Fill until you have a few inches of the top of the sock left. Tie off and roll down the excess onto the body.Horizontal image showing a sock gnome body created by adding weight, fill, and tying off the top with embroidery thread. 
  6. Double over a pipe cleaner, twisting it upon itself to make it sturdier. Repeat with the other pipe cleaner and set aside.Close up image showing two twisted pipe cleaners to make posable bunny ears. 
  7. Turn the glued glove right sides out and slide onto the gnome body, taking care to pull the glove down to cover the entire sock gnome. Glue the glove to the sock gnome body.Horizontal process image showing to place a glove cut into a bunny body over a sock gnome. 
  8. Create the beard by measuring to your specifications (mine was a U-shape, 3 inches wide by 4 inches high) and using the pen to draw your shape on the back of the fur fabric. Cut out the fur with the craft knife, taking care to only cut the fabric backing.Horizontal image showing how to cut fur the right way for gnome beards using an Exacto knife.
  9. Glue down 1/4 inch of the top edge of the beard to make it look nice. Brush up the top of the beard fur, split the fur to the fabric backing, and add the wood ball. Cut two pieces of 3 inch thread and tuck up under nose with glue.Close up horizontal image of a gnome beard, a wood ball for a gnome nose, and embroidery thread made to resemble whiskers for an Easter bunny gnome.
  10. Cut two 1/2-3/4 inch pieces from the fur to accent the ears. Glue them to the base of the ears on the gnome, making sure the fur is pointing up.Horizontal image of a bunny ear and tuft of fur being assembled on an Easter bunny gnome made with a gray glove.
  11. Glue the tail to the center back of the Easter gnome and the beard to the front. Cut the back of each ear and insert a pipe cleaner, securing the bottom only to the body before closing up the opening.Horizontal image showing how to insert pipe cleaners into a sock bunny for posable ears.

Notes

For more fun DIY Easter gnome ideas, visit Ruffles and Rain Boots or the Sarah Nenni-Daher YouTube channel.

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

Did you make this?

Please leave a comment or share a photo and tag me @rufflesandrain

More Easter Gnome Projects You Might Like

  • Easter Gnomes to Make – These popular gnomes for Easter will get you creating with inspiration, techniques, and gnome patterns.
  • Easter Gnome Bottle Topper – This is a very quick craft and works as a hostess gift or decor. Psst: you’re done in less than 10 minutes.
  • Scandinavian Easter Bunny Gnome – This adorable bunny gnome pattern is chockfull of extras and you can have them holding anything you’d like.
  • Spring Clay Pot Gnome – This floral crown sporting gnome is made from a clay pot and takes you from Spring all the way through Easter.
  • Free Easter Gnome Coloring Pages – Coloring is such a relaxing way to be creative. Download these free digital or printable gnome coloring pages.

Please Save or Share This

Your shares are how this site grows and I am sincerely grateful. Know a friend or crafter who would love this easy DIY? Save it to an Easter pin board or share it with a crafty group on Facebook.

Split image of the front and back of a cute bunny gnome with posable ears and text which reads 10 minute Easter gnome with a glove.
Just 10 minutes and some easy Dollar Tree finds make this sweet Easter gnome.

Leave a Reply

Your email address will not be published. Required fields are marked *